Licania lucida J.F.Macbr.
Licania mollis is a tree with a heavy crown growing up to 30 metres tall. The bole is unbuttressed, usually cylindrical, around 40 - 60cm in diameter and unbranched for up to 18 metres[
The tree is harvested from the wild as a local source of wood. It is also harvested commercially for its timber, which is exported.
Northern S. America - northern Brazil, northern Peru, Colombia, Venezuela.
A canopy tree in rainforests, especially on lateritic soils[
]. River banks and river islands and in riverine forest on sandy soil[
|Other Uses Rating||
The heartwood is generally a yellowish brown to brown or dark brown, sometimes with a reddish tinge; it is clearly demarcated from the tan-coloured sapwood. The grain is straight; texture close and fine; without characteristic odour or taste; growth layers are not evident. The wood is very dense, hard, very heavy, strong, not very durable in the soil but very resistant to marine borers. Most species contain an abundance of silica[
]. The wood is difficult to work owing to the high silica content and hardness. The combination of these factors causes a rapid dulling of cutting edges. When sharp cutting edges are maintained, the wood can be machined to a smooth surface in planing, boring, sawing, and other operations[
]. The high marine borer resistance of the wood indicates that the highest use for these timbers is for piling and marine construction in waters infested with marine borers. The difficulty in working these timbers except with an axe or adze, as well as their high density and only moderate resistance to decay, suggests that their most suitable secondary use would be in heavy construction above ground[
The wood is used for fuel and also for making charcoal[
If you have any useful information about this plant, please leave a comment. Comments have to be approved before they are shown here.